 |  |  |  |
 |  |
| ||||||||||||||||||||||||||||||||||||
| Material : |
Body: SS 304, SS 316 or SS 316L (cast or forged) | |
|
Handle: | * SS3 04 Solid bar with phenolic knob for 4 position. | |
| * Nylon 6 + reinforce glass fiber handle with SS 304 gripper bar | ||
| or all SS 304 handle for 12 position. | ||
| Seat: Silicone, EPDM and Viton is available | ||
| Operation : | Available for pull handle 4 position and gripper handle 12 position. | |
| Range of control systems : | Available for air actuators, micro switches, solenoids...etc. | |
| Size : | Usually 1" - 4", any size is demandable. | |
| Fitting ends: | BS, DIN, SMS, 3A, Weld ends, Male ends and Clamp ends. | |
| Working pressure : |
* -0.9 to 10 Bar for cast body. | |
| * -0.9 to 20 Bar for forged body. | ||
| Working temperature : | -10oC up to 150oC. | |
| Disk head size : | * 9.4 x 9.4mm available for cast & forged body. | |
| * 8 x 12mm, 12 x 12mm available for forged body. | ||
| Safety : | 100% 6kgf/cm2 air or 25kgf/cm2 hydraulic and 300k times cycle test. | |
|
|
Pull Handle 4 Position | |||||||||
|
|
|
|||||||||
|
|
Gripper Handle 12 Position | ||||||||||||||
|
|
|
